100 AMP ARC Welder

100 AMP ARC Welder Review

100 AMP ARC Welder Feature

• Welder uses standard 110 Voltage
• Welder has current ranges from 40 to 100 AMP
• Welder is industrial strength
• The "no load" voltage is 48
• Class of insulation is H

Uses standard 110 Volt with current ranges 40 to 100 AMP. The "no load" voltage is 48. Rated duty cycle 10% with input capacity @ 60% 4.8KVA. Class of insulation is H with rod diameter range 1/16" to 3/32." Includes power supply cord, electrode hoder with cord, earth clamp, brush, welding mask and handle. It is industrial strength. Includes

Custom Leathercraft 2089L Welder's Glove, Large

Custom Leathercraft 2089L Welder's Glove, Large Review

Custom Leathercraft 2089L Welder's Glove, Large Feature

• Split cowhide welders glove
• 14-Inch flared gauntlet cuff
• Wing thumb with full sock lining

MEN'S WELDER GLOVE - One size fits most. Split cowhide welders glove. 14 flared gauntlet cuff. wing thumb with full sock lining.

Hobart 500544 Champion Elite 11,000 Watt Generator/225 Amp AC, 210 Amp DC Stick Welder With 23 HP Kohler 4-Cycle Engine

Hobart 500544 Champion Elite 11,000 Watt Generator/225 Amp AC, 210 Amp DC Stick Welder With 23 HP Kohler 4-Cycle Engine Review

Hobart 500544 Champion Elite 11,000 Watt Generator/225 Amp AC, 210 Amp DC Stick Welder With 23 HP Kohler 4-Cycle Engine Feature

• Four 120 volt (20 amp), one 240V (50 amp), and one 120/240 volt (50 amp) receptacles with push-button reset
• Auxiliary power while welding provides the capability to run other equipment (lights, grinder) at the same time
• Heavy-duty construction with 100% duty cycle, fully-enclosed engine design, large battery, rugged electrical connections
• Auto-idle for greater fuel savings and reduced noise
• No tools oil change and standard hour meter to help maintain routine scheduled oil servicing

The Hobart Champion Elite Generator/Welder is a mobile source heavy-duty generator/welder. This engine-driven solution comes with a 23 HP Kohler engine that delivers up to 11,000 Watts of AC generator power to run tools, worklights or backup power during an outage. U.S.A. Rated Watts (kW): 9,500, Surge Watts (kW): 11,000, Receptacles (qty.): 6, Circuit Breakers: Yes, Welding Amperage Range: 50 - 210 DC, 50 - 225 AC, Weldable Metals: Mild steel, stainless steel, aluminum, cast iron, Weld Thickness (in.): 1/2, Duty Cycle: 100% @ 210 Amps DC; 100% @ 225 Amps AC, Clamp Cable Length (ft.): Not included, Engine: Kohler twin cylinder, overhead valve, industrial air cooled, Engine Displacement (cc): 674, Gross Torque: 37.9ft.-lbs. @ 2,400 RPMs, HP: 23, Start Type: Electric, Auto-Idle: Yes, Fuel Capacity (gal.): 12, Dimensions L x W x H (in.): 46 x 20 x 31

Clarke 190EN Mig/Fluxcore Gas/No Gas 220V Welder KIT

Clarke 190EN Mig/Fluxcore Gas/No Gas 220V Welder KIT Review

*NEW* Clarke USA 190EN MIG/Fluxcore Wire Welder KIT plus regulator kit, helmet, welding gloves, and welding cart (220V) This NEW in factory sealed box Clarke 190EN MIG/Fluxcore 220V Wire Feed Welder KIT is easily converted from Gas to Fluxcore welding and will easily weld 1/4 in. steel in a single pass. Electronic wire speed control and 6 variable heat settings allow you to precisely adjust the welder to your needs and is fan cooled for better performance. Operates on 220 volt electrical supply. You will be getting this NEW in factory sealed box Clarke 190EN welder along with New gas regulator kit, welding cart, welding helmet, welding gloves, roll of wire, chipping hammer, welding mask, and manual. Features: 6 power settings for maximum welding control Easily welds 1/4" in a single pass Fan cooled for better performance Solid state electronic heat control with large PC board for better wire speed control Weld steel, aluminum, stainless, copper and cast iron, requires correct wire and gas Operates from standard 220 VAC. Automatic thermal safety switch prevents overload Mig gun with full On / Off safety control. Mig Gun is non-live with built in gas shut off. Welds with or without gas Tough metal casing Input 230V, 60HZ, 25 Amps, 1 ph

Clarke 160EN Mig/Fluxcore Gas/No Gas 220V Welder KIT

Clarke 160EN Mig/Fluxcore Gas/No Gas 220V Welder KIT Review

Clarke 160EN Mig/Fluxcore Gas/No Gas 220V Welder KIT Feature

• NEW

New Clarke 160EN 220V welder KIT which includes regulator kit, welding cart, welding gloves, and welding helmet This new in factory box Clarke 160EN mig/fluxcore 220V wire welder KIT is easily converted from fluxcore to gas welding and will weld 1/4 in. steel in a single pass. Electronic wire speed control and 6 variable heat settings allow you to precisely adjust the welder to your needs and is fan cooled for better performance. Operates on 220 volt electrical supply. You will be getting this new in factory box Clarke 160EN welder along with new gas regulator kit, welding cart, welding gloves, welding helmet, roll of wire, chipping hammer/brush, welding mask, and manual as well. Features: 220V wire welder Welds with or without gas Advanced thermal overload protection for transformer Electronic variable wire feed control Six power settings for maximum welding heat control Fan cooled for better performance Weld up to 1/4" in a single pass Welds steel, stainless steel, aluminum, or cast iron Easily changed to mig welding for stainless and aluminum Tough metal casing CSA approved Input: 230V, 60 Hz, 22.5A, 1 Ph Ouput: 120A @ 20 VDC - 25% MAX O.C.V.=30 VDC MAX 150A

Neiko Solar-Powered Auto Darkening MIG/TIG Welding Helmet, ANSI Approved Lens

Neiko Solar-Powered Auto Darkening MIG/TIG Welding Helmet, ANSI Approved Lens Review

Neiko Solar-Powered Auto Darkening MIG/TIG Welding Helmet, ANSI Approved Lens Feature

• Switch between shades 9 to 13 with 1/10000 second reaction time
• Solar powered helmet with internal rechargeable lithium battery
• Wear comfortably with a two-way adjustable headband
• Meet ANSI Z87.1 standards

The shield lens darkens instantly when welding begins and clears when wielding stops. Switch easily between shades from 9 to 13 with 1/10000 second reaction time. The internal rechargeable lithium battery is rechargeable by the solar cell. Two-way adjustable headband ensures a comfortable fit. The helmet meets ANSI Z87.1 standards.

Millermatic 140c w/ Auto-Set

Millermatic 140c w/ Auto-Set Review

Millermatic 140c w/ Auto-Set Feature

• New! Auto-Set is a breakthrough control that automatically sets your welder to the proper parameters.
• NEW! Smooth-Start patent-pending technology provides a smooth, spatter-free start.
• "Tip Saver" short circuit protection shuts down output when tip is shorted to the work.
• Standard Built-in solid-state contactor circuit makes wire electrically "cold" until trigger is pulled.

The Millermatic 140 mig welder with Auto-Set offers all the benefits of the standard Millermatic 140, but adds Auto-Set to eliminate the guesswork. Use Auto-Set when you want the speed, convenience and confidence of pre-set controls. Simply set the wire diameter, set the material thickness, and go! The Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel with solid wire and only works with .024 and .030 solid wires and C25 shielding gas (75% Argon, 25% CO2).

Campbell Hausfeld WG3080 120 Volt Pro-125 Flux-Core Welder

Campbell Hausfeld WG3080 120 Volt Pro-125 Flux-Core Welder Review

Campbell Hausfeld WG3080 120 Volt Pro-125 Flux-Core Welder Feature

• Heavy feed with heavy-duty drive-deck
• 5 heat settings
• Professional grade torch
• 120V mig-ready wire welder
• Includes flux wire spool and 2 extra contact tips

The Campbell Hausfeld Pro-125 120V Flux-core Welder can be used for all types of metal fabrication. No gas is required, but is MIG ready using optional hose/regulator kit. 5 heat settings for precise adjustment to the thickness of your metal. The plug-in Professional cold torch with trigger activated arc allows precise weld placement and the quick-connect adapter makes it easy to replace. 125 Amp maximum output allows for weld sizes 18-gauge to 3/16-Inch. Wire speed tracking maintains continuous wire flow by compensating for movement. Thermal overload protection automatically shuts off to avoid overheating. Great for repairs, projects, metal fabrication, and light production. Includes two extra contact tips and flux-core wire.

MIG-195 GAS / NO GAS DUAL MIG WELDER FLUX 220V 190 AMP

MIG-195 GAS / NO GAS DUAL MIG WELDER FLUX 220V 190 AMP Review

MIG-195 GAS / NO GAS DUAL MIG WELDER FLUX 220V 190 AMP Feature

• Welding current: 60 to 190 amps

No gas, CO2, or gas operation Input voltage: 230V/60Hz AC, single phase Welding current: 60 to 190 amps Duty cycle: 10% @ 180amps 60% @ 74amps 100% @ 60 amps Max open circuit voltage: 37v Wire capacity: .031 (0.8mm) steel & stainless steel 0.030" to 0.039" (1.0mm) aluminum 0.047(1.2mm) flux core Variable feed speed control Torch with full ON/OFF safety control Automatic thermal safety protection Easily converted to gas operation Simple to operate-fan cooled Weld mild steel, aluminum, stainless steel and cast iron (must use correct wire and gas) Include welding mask, chipping hammer/brush. torch, tip, ground cord with clamp

Clarke WE6480A 120-Volt Fluxcore Wire Welder

Clarke WE6480A 120-Volt Fluxcore Wire Welder Review

Clarke WE6480A 120-Volt Fluxcore Wire Welder Feature

• Fluxcore welder
• Tweco type torch
• Multiple power settings
• Welding range 65 to 95 AMPS
• Welds up to 1/8" mild steel in a single pass

This professional welder is simple to operate. It has a 20 percent duty cycle at 60 amps. Also it's a 110 input voltage, single phase. The welder has 2 heat settings available. The maximum metal thickness is 1/8" of mild steel. Made with the quality and durability to last!

Northern Industrial Welders Arc 200 230 Volt Stick Welder - 200 Amp Output

Northern Industrial Welders Arc 200 230 Volt Stick Welder - 200 Amp Output Review

Northern Industrial Welders Arc 200 230 Volt Stick Welder - 200 Amp Output Feature

• Stick welder handles 1/16in.-5/32in. dia. electrodes
• Welds mild steel up to 3/8in. on single pass
• Infinite amperage control for fine adjustment
• 65-200 Amp welding range
• Amperage indicator

This Northern Industrial stick welder can weld mild steel up to 3/8in. thick on single pass. Portable welder has handles and wheels for maneuverability in the shop. Volts: 230, Amps: 65 - 200, Duty Cycle: 180A @ 10%, Amperage Adjustments: Infinite, Range Selection: 1 amperage adjustment, Weldable Metals: Steel, stainless steel, cast iron, hard surfacing, Weld Thickness (in.): 3/8, Electrode Size (in.): 5/64 - 5/32, Electrode Cable Length (ft.): 10, Clamp Cable Length (ft.): 6 1/2, Power Cord (ft.): 8, Dimensions L x W x H (in.): 14 x 10 3/4 x 15 (cabinet only), 16 x 10 3/4 x 28 (wheels and handle)

Anchor Machine Torch Pcm52 (100-9-5643) Category: Plasma Torches

Anchor Machine Torch Pcm52 (100-9-5643) Category: Plasma Torches Review

Anchor Machine Torch Pcm52 (100-9-5643) Category: Plasma Torches Feature

• Sold Individually

Item #: 100-9-5643.

• Cable Cord Model = PCH/M-52

Customers also search for: Discount Anchor Machine Torch Pcm52, Buy Anchor Machine Torch Pcm52, Wholesale Anchor Machine Torch Pcm52, 604669209219, 9-5643, Plasma Torches

Lincoln Electric Easy MIG 140 115V Flux Cored/MIG Welder - 140 Amp Output, Model# K2697-1

Lincoln Electric Easy MIG 140 115V Flux Cored/MIG Welder - 140 Amp Output, Model# K2697-1 Review

This Lincoln Easy MIG 140 welder uses common 120V power and is a fine choice for home projects, farm repairs or basic auto body work. It features simple 2-knob tapped control for easy set up of either gas-less flux cored welding or gas shielded MIG welding. Volts: 120, Amps: 140, Duty Cycle: 20% at 90 Amps, 19.5 Volts, Mig Ready: Yes, Wire Feed Speed Control: 50-500 IPM, Weldable Metals: Steel, aluminum, Weld Thickness (in.): Up to 5/16in. mild steel, Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Yes, when welding MIG, Welding Wire Diameter (in.): .025 to .045, Power Cord (ft.): 6, Cart: No, Dimensions L x W x H (in.): 18 5/8 x 10 1/8 x 14

Hobart 500551 EZ TIG 165i 230-Volt Inverter-Based AC/DC Welder

Hobart 500551 EZ TIG 165i 230-Volt Inverter-Based AC/DC Welder Review

Hobart 500551 EZ TIG 165i 230-Volt Inverter-Based AC/DC Welder Feature

• Offers a unique single knob control
• Easiest AC/DC TIG welder to set up and use
• It has superior weld performance

The versatile Hobart EZ TIG 165i welds 22-ga. - 3/16in. steel and is a versatile performer for auto body shop, fabrication, home hobbyist, metal art, vocational training and sign fabrication operations. U.S.A. Volts: 230, Amps: 165, Duty Cycle: 20% at 150 Amps, Amperage Adjustments: Infinite, Range Selection: 10 - 165, Weldable Metals: Mild steel, stainless steel, aluminum, steel/chrome moly, Weld Thickness (in.): 22-ga. to 3/16, Electrode Size (in.): 3/32 collet & collet body with 2% ceriated tungsten, Electrode Cable Length (ft.): 12 1/2, Clamp Cable Length (ft.): 12, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Yes, Power Cord (ft.): 10, Dimensions L x W x H (in.): 17 x 9 7/8 x 23 7/8

Hobart 770488 Leather Welding Jacket - L

Hobart 770488 Leather Welding Jacket - L Review

Hobart 770488 Leather Welding Jacket - L Feature

• Superior Protection
• Heavy Duty Stitching
• Reinforced Snaps

The Hobart 770486 Leather Welding Jacket works well to protect your and your clothing from sparks while welding.  The high quality leather of the 770486 Welding Jacket has heavy duty stitching and reinforced snaps to hold up to rough working conditions. Features: Superior protection welding sparks Heavy duty stitching resists fraying and split seams Reinforced snaps resist tearing What's In The Box: Hobart 770488 Leather Welding Jacket Size Large

Lincoln Electric K1170 AC225S Stick Welder

Lincoln Electric K1170 AC225S Stick Welder Review

Lincoln Electric K1170 AC225S Stick Welder Feature

• Output Range: 40-225 Amps AC
• Welds metals 16 gauge and heavier
• Welds steel, cast iron, and stainless steel
• 3 year part and labor warranty
• 225 Amp

The Lincoln electric AC-225 compact stick welder produces an extremely smooth AC arc for welding a wide variety of materials including carbon, low alloy and stainless steels as well as cast iron. Ideal for home, farm, shop, repair and maintenance, build-up welding and light fabrication. Easy to install with attached input power cable and NEMA 6-50P plug, plus it's easy to operate: a full range 40-225 Amp selector switch quickly sets the welding current and ensures a uniform arc each and every time you weld. Smooth arc makes it easy to weld with different electrodes, including mild steel, low hydrogen, stainless steel and hardfacing electrodes. U.S.A. Volts: 230, Amps: 40 - 225, Duty Cycle: 225A / 25V / 20%, Amperage Adjustments: 40 - 225, Range Selection: 40 - 225, Weldable Metals: Carbon, low alloy, stainless steel, cast iron, Weld Thickness (in.): Up to 1/4, Electrode Size (in.): 3/32 to 5/32, Electrode Cable Length (ft.): 10, Clamp Cable Length (ft.): 10, Power Cord (ft.): 6, Dimensions L x W x H (in.): 12 x 17 1/4 x 24

Auto Darkening Solar Powered Welding Helmet - ANSI Approved, Red Flame Design with Polished Black Finish

Auto Darkening Solar Powered Welding Helmet - ANSI Approved, Red Flame Design with Polished Black Finish Review

Auto Darkening Solar Powered Welding Helmet - ANSI Approved, Red Flame Design with Polished Black Finish Feature

• Premium solar powered welding helmet with unique designs
• Auto-darkening lens responds in 1/25000 seconds, shades can be switched continuously from shades 9-1
• UV and IR protection are in compliance with EN169 standards for welding filters
• Design and construction meet ANSI Z87.1 standards for eye protection devices, two-way adjustable hea
• Solar rechargeable lithium battery

Premium solar powered welding helmet that comes with three unique designs. These helmets fully meet industry standards: auto-darkening lens responds in 1/25000 seconds, darkens when welding begins and clears when welding stops, shades can be switched easily and continuously between shades from 9 to 13 with 1/10000 seconds reaction time, UV and IR protection are in compliance with EN169 standards for welding filters, and the design and construction meet ANSI Z87.1 standards for eye protection devices. The internal rechargeable lithium battery is rechargeable by the solar cell. Two-way adjustable headband ensures a comfortable fit. The unique designs make them more than great welding helmets.