Anytime Tools 3 pc COBALT SPOT WELD CUTTER WELDER DRILL BIT SET

Anytime Tools 3 pc COBALT SPOT WELD CUTTER WELDER DRILL BIT SET Review

Anytime Tools 3 pc COBALT SPOT WELD CUTTER WELDER DRILL BIT SET Feature

• Includes 3 cutters: 6.5mm, 8mm and 10mm
• Solid High Speed COBALT bits with Titanium Coating
• Length: 1-3/4"
• Special centering nib design to avoid slipping
• Comes with aluminum case

Easily Remove Spot Welds!

Specialized blades quickly remove spot welds without damage to surrounding sheet metal. Better panel separation than with standard panel cutters.

Self-centering point minimizes walking, will not require a punch. Solid one piece construciton will not break or snap.

Features:

• Includes 3 cutters: 6.5mm, 8mm and 10mm
• Solid High Speed COBALT bits with Titanium Coating
• Length: 1-3/4"
• Special centering nib design to avoid slipping
• Comes with aluminum case

Clarke 130EN Mig/Fluxcore 110V Welder Gas/No Gas KIT

Clarke 130EN Mig/Fluxcore 110V Welder Gas/No Gas KIT Review

*NEW* Clarke USA 130EN MIG/Fluxcore Wire Welder KIT plus regulator kit, helmet, welding gloves, and welding cart (110V) This NEW in factory sealed box Clarke 130EN MIG/Fluxcore Wire Feed Welder KIT is easily converted from Fluxcore to Gas welding with the new Clarke gas regulator kit that comes with this and will weld up to 1/4" inch steel in a single pass! New welder comes with gas regulator kit, welding cart, welding helmet, welding gloves, roll of wire, chipping hammer/brush, and manual as well! Features Tweco-style torch with full On/Off Safetly Control. Electronic wire speed control and 4 variable heat settings allow you to precisely adjust the welder to your needs. Operates on standard 110 volt electrical supply. 120 V Wire Welder Tweco-style torch with full On/Off Safety control Advanced safety overload protection for transformer Electronic variable wire feed control 4 power settings for maximum welding heat control Welds steel, stainless steel, aluminum, or cast iron Fan cooled for better performance Welds up to 1/4" in a single pass Uses Fluxcore or solid steel welding wire Welds with or without gas Tough metal casing 200 Amp ground clamp CSA approved Input: 120V, 60 Hz, 13A, 1 Ph Ouput: 60A @ 21VDC - 40% MAX O.C.V. = 30 VDC MAX 85A

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder (Flux Core Only)

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder (Flux Core Only) Review

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder (Flux Core Only) Feature

• Reconditioned Campbell Hausfeld products have a 90 days warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from 24-gauge to 3/16 Inch steel
• Great for use around the home projects autobody, mufflers and more
• Uses .030 Inch and .035 Inch wire size in either 4 Inch or 8 Inch spools
• Factory Reconditioned. Physical appearance WILL VARY depending on stock availability

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 115 Volt Wire Feed Welder - WF200000RB

Hobart 770589 Water Resistant Protective Cover Ironman 230 Welder

Hobart 770589 Water Resistant Protective Cover Ironman 230 Welder Review

Hobart 770589 Water Resistant Protective Cover Ironman 230 Welder Feature

• Protective cover
• Light weight
• For IronMan 230

Hobart Ironman 230 Cover 770589 Form-fitted, vinyl-laminated, polyester fabric resists stains and mildew and protects the finish of your Ironman(tm) 230 MIG welder. Free standard ground shipping within contiguous U.S.

Clarke WE6527 160EN 240-Volt Fluxcore/MIG Welder

Clarke WE6527 160EN 240-Volt Fluxcore/MIG Welder Review

Clarke WE6527 160EN 240-Volt Fluxcore/MIG Welder Feature

• Weld Steel, Aluminum, Stainless Steel and Cast Iron
• Automatic Thermal Overload Protection
• Tweco type torch with full ON/OFF safety control
• Weld up to 1/4" in a single pass. With the 30 to 150 Peak Amps
• 6 power setting and Fan cooled

Features and Benefits Advanced thermal overload protection for transformer Electronic variable wire feed control Six power settings for maximum welding heat control Easily changed to Mig welding for stainless steel and aluminum Fan cooled for better performance This wire welder welds up to 1/4" in a single pass.  CSA approved Specs: Input: 230 volt - 60 HZ; 22.5A 1PH Output: 120A @ 20VDC-25% MAX O.C.V.=30VDC MAX 150A 22" x 11.6" x 15.4" Weight: 63 lbs.

Lincoln Electric K2501-1 Century 80GL Wire Feed Welder

Lincoln Electric K2501-1 Century 80GL Wire Feed Welder Review

Lincoln Electric K2501-1 Century 80GL Wire Feed Welder Feature

• Ideal for general purpose metal repairs and building projects
• Safe cold wire design, arc is not established until trigger is pulled
• Welding range of 35 to 88 amps covers many tasks
• Can weld 18 gauge sheet metal up to 1/8 inch steel
• 1 year warranty on parts and labor (90 days on gun and cable)

Easy - to - use Century 80GL Wire Feed Welder plugs into a standard outlet and requires NO gas. BIG BUCKS OFF! Weld like a pro at home and SAVE BIG! Use this fast, continuous-feed Welder for a wide range of utility projects. Ideal for repairing tools, auto body, machinery and more. This gasless unit carries the respected Century name for top quality and lasting performance. Seems my special arrangement "zaps" BIG BUCKS OFF the usual price! Amazing deal! Details: Flux core design requires no gas; Plugs into standard 110V outlet (20 amp circuit); Current / Voltage / Duty Cycle: 70A/21V/20%; Average range: 35-88 amps; Welds up to 18 ga. sheet metal or 1/8" thick steel; 2 preset heat ranges; Uses .035 flux core wire on 4" spools (available at local welding supply store); Squeeze trigger to weld; Long-life insulated transformer; Includes welding gun, nozzle, tips, .035 4" spool of flux core wire and manual; Size: 9 x 18 x 13"h. weighs 42 lbs. UL-listed. Tell Santa you want this baby. Order Today! Century 80GL Wire Feed Welder

ITW PERFORMANCE POLYMERS 22045 "DEVCON" PLASTIC WELDER 1 OZ

ITW PERFORMANCE POLYMERS 22045 "DEVCON" PLASTIC WELDER 1 OZ Review

ITW PERFORMANCE POLYMERS 22045 "DEVCON" PLASTIC WELDER 1 OZ Feature

• PLASTIC WELDER
• 1 oz.
• Heavy duty
• Sets in 15 min
• Use on hard plastics, metal, wood, concrete, and glass

DEVCON PLASTIC WELDER (1 UNIT = 6 EACH) *25 ml. *Plastic bonding system that is even stronger than epoxy *3500 PSI sets in 15 minutes *Bonds plastic to plastic, plastic to metal and metals to metals *Thick formula fills gaps *Is high impact and water resistant *Easy to mix and requires minimal surface preparation *Clamshell

Lincoln Electric K1297 AC/DC 225/125 Arc Welder

Lincoln Electric K1297 AC/DC 225/125 Arc Welder Review

Lincoln Electric K1297 AC/DC 225/125 Arc Welder Feature

• Ideal for farm, shop, and home use where improved arc welding performance is desired
• 40-225 amps AC, 30-125 amps DC output range
• Welds metals of 16 gauge and heavier, welds steel, cast iron, and stainless steel
• Easy to install, comes with attached input power cable and plug
• 3 year part and labor warranty

• AC welding output range of 40-225 amps and a DC welding output range of 30-125 amps
• Easy to install. Comes with attached input power cable and plug.
• Easy to operate with front mounted AC/DC polarity switch and full range amperage selector switch for accurate and dependable procedure setting
• Traditional design provides long-life and low cost operation
• Compact size allows for easy storage and handling

The AC/DC 225/125 is an arc welding power source with an AC welding output range of 40-225 amps and a DC welding output range of 30-125 amps. It is an extremely useful stick welding power source for maintenance repair, fabrication, construction, erecting and hardfacing applications. Also for cutting and piercing holes in steel.   Smooth arc makes it easy to weld with different electrodes, including mild steel, low hydrogen, stainless steel and hardfacing electrodes.  Use the electrode polarity switch on the front of the machine to select a DC welding arc where a stable arc is essential.  Select an AC welding arc for large diameter general purposes electrodes for welding heavier plate where higher deposition rates and travel speeds are desired.  Unit includes: Insulated electrode holder and cable, Heavy duty work clamp and cable, Helpful Welder’s Guide and Input cable with attached plug.

Specs:

• Input power: 230/1/60
• Rated output current/Voltage/Duty Cycle AC: 225A/25V/20%/79OCV; DC: 125A/25V/20%/73 OCV
• Input current @ rated output: AC:50; DC:36
• Output range: 40-225 Amps AC; 30-125 Amps DC
• Dimensions: 24" x 17.25" x 12"
• Net weight: 129 lbs.

Pro-Grade Ultra-Portable 100-Amp Electric Arc Welder - 110V

Pro-Grade Ultra-Portable 100-Amp Electric Arc Welder - 110V Review

Pro-Grade Ultra-Portable 100-Amp Electric Arc Welder - 110V Feature

• 100 Amp 110 VAC Arc Welder
• Arc Welder
• 100 Amp Arc Welder
• Welder

Model and Color May Very Features: - Voltage: 110 Vlt - Frequency: 60 Hz - Required Current: 26 Amp - Single Phase - Amperage Control: 45 To 100 Amp - Welds Up To 1/4" Mild Steel - UL Listed - Up To 100% Duty Cycle Include: 1 Pc Welders Shield 1 Pc Stinger - Compact And Easy To Handle - Perfect For Home Projects And Maintanance

Factory-Reconditioned Campbell Hausfeld RBWS280000 230-Volt AC Stick Welder

Factory-Reconditioned Campbell Hausfeld RBWS280000 230-Volt AC Stick Welder Review

Factory-Reconditioned Campbell Hausfeld RBWS280000 230-Volt AC Stick Welder Feature

• Reconditioned Campbell Hausfeld products have a One Year warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from up to 3/8 Inch mild steel
• 230 Volt 50 Amp input
• Use welding rod sizes 1/16 Inch to 1/8 Inch
• Factory Reconditioned.

Duty cycle: 20% @180 amps. Amp control dial provides infinite output adjustment. Integrated thermal overload circuit & breaker for added protection. Built-in storage for rods, cords, helmet and accessories. (Electrode containers not included). Quick-connect dense plugs for easy removal and storage of cords. Multi-position cart allows the welder to be placed vertically or horizontally for easy access to controls, 230V single-phase welder easily welds thick steel. 225 amp AC maximum output. Infinite shunt control offers more precise adjustment when matching welder heat to metal thickness. Integrated cart for greater portability and convenience. Includes a starter pack of stick electrodes, chipping hammer/brush, and protective face shield. 5 year manufacturer's warranty.

Hobart 500554 Handler 190 Wire Feed Welder

Hobart 500554 Handler 190 Wire Feed Welder Review

Hobart 500554 Handler 190 Wire Feed Welder Feature

• Features a 7-position voltage switch.
• Operates on 230V input power and offers an output range of 25 to 190 amps.

The Hobart Handler 190 is a powerful and portable welder designed to weld mild steel, flux core, aluminum and stainless steel. Door chart allows user to quickly reference initial settings for different applications, and provides a quick starting point for novices and professionals alike. The Handler 190 comes spoolgun ready for exclusive use with the SpoolRunner 100 (not included). U.S.A. Volts: 230, Amps: 190, Duty Cycle: 30, Mig Ready: Yes, Wire Feed Speed Control: Infinite, Weldable Metals: Steel, aluminum, stainless, Weld Thickness (in.): 24 gauge to 5/16in. steel in single pass, Clamp Cable Length (ft.): 10, Regulator and Gas Hose Included: Yes, Shielding Gas Required: Optional; regulator, hose and built-in gas solenoid are included, Welding Wire Diameter (in.): 0.024, 0.030, 0.035, Power Cord (ft.): 10, Cart: No, Dimensions L x W x H (in.): 24 x 19 x 13 1/2

Pro Series MMIG125 125-Amp Fluxcore Mig Welder Kit, Black

Pro Series MMIG125 125-Amp Fluxcore Mig Welder Kit, Black Review

Pro Series MMIG125 125-Amp Fluxcore Mig Welder Kit, Black Feature

• Complete Package Includes: Ground Cable with Clamp, Welding Gun, Spool of Flux Core Wire, Face Shield, Brush Hammer
• Thermal overaload protection, 80-125 Amps, Duty cycle 20% at 80 Amps
• Features Include: Thermal Overload Protection
• Amps: 80 (Max 125), Duty Cycle 20-Percent at 80 Amps
• Heat settings: Two and Max Metal Thickness: 18 Gauge / 3/16-Inch

MMIG125 Features: -Fluxcore MIG welder kit.-Thermal overload protection.-Two heat settings.-Amps: 80 (Max 125).-Wire size: 0.030 - 0.035''. Includes: -Includes ground cable with clamp, welding gun, spool of flux cored wire, face shield and brush hammer. Specifications: -Duty cycle 20pct at 80 Amps. Assembly Instructions: -No assembly required. Dimensions: -MAX metal thickness: 18 Gauge / 0.19''. Collection: -Pro Series collection.

Campbell Hausfeld WF2150 Flux Core Wire Feed Welder

Campbell Hausfeld WF2150 Flux Core Wire Feed Welder Review

Campbell Hausfeld WF2150 Flux Core Wire Feed Welder Feature

• Robust steel case for portability and durability
• Infinite wire speed control allows adjustment for smooth even weld bead
• Thermal overload protection automatically shuts off to avoid overheating
• Professional torch equipped with trigger activated arc for easy support

Campbell Hausfeld 115V Flux Core Wire Feed Welder. Easy to use, with professional results every time! SAVE BIG! Portable performer makes easy work out of welding! Welds from 24-ga. to 3/16" steel, with adjustable, consistent wire feed for smoother, more even welds every time, even if you're a novice! Perfect around the home or the shop. The clear choice for pros and novices alike! Details: Robust steel case for jobsite-tough durability over the long haul; Works with standard 15 or 20-amp household outlets; Capable of welding mild and stainless steel from 18-ga. to 3/16"; 4 heat settings for varying metal thicknesses; Thermal overload shut-off protects welder by shutting down when the duty cycle has been exceeded; Duty cycle: 20% @ 70A; 5-yr. limited manufacturer's warranty; Weighs only 46 lbs.; Includes Flux core wire and 2 extra tips. Make sure you've got the right tool for the job! Order yours today! Campbell Hausfeld 115V Flux Core Wire Feed Welder

Traditional Welders Cap - Wavy Flag

Traditional Welders Cap - Wavy Flag Review

Traditional Welders Cap - Wavy Flag Feature

• This welder's cap is made from 100% cotton canvas
• Rugged double stitching and built-in terry sweatband
• One size fits all
• Color: Wavy Flag

This welder's cap is made from 100% cotton canvas and has rugged double stitching. Built-in terry sweatband. One size fits all.

Thermal Arc W1003203 95S DC Tig and Stick Package

Thermal Arc W1003203 95S DC Tig and Stick Package Review

Thermal Arc W1003203 95S DC TIG and Stick PackagePart # W1003203The Thermal Arc W1003203 95S DC Tig/Stick provides Excellent Portability! Lightweight at under 10 lbs. with easy to carry shoulder strap.  Easy to use! Simple, user friendly set-up and operation.  The Single Amperage Range allows the operator to accurately set the welding amperage.  The 95S Tig/Stick welder provides Thermal Overload Protection this alerts the operator if duty cycle is exceeded or airflow is blocked.  The W1003203 is cable & plug Fitted! Supplied with 115VAC primary cable and plug. Also the 95S Package has Twist Lock Output Terminals! 25mm dinse style allows for easy polarity changing and cable connection.Thermal Arc 95S W1003203 Includes:20 Amp adapter plug & cable Victor Cutskill Argon regulator / flowgauge 95S Inverter Power Source Operating manual Quick set up DVD Tig Torch 17V style 10ft (3m) with accessories Tweco Weldskill style electrode holder with 10ft (3m) lead Tweco Weldskill style ground clamp with 10ft (3m) lead

ArcOne I100STS Industrial Series Stick and TIG Welding Machine

ArcOne I100STS Industrial Series Stick and TIG Welding Machine Review

ArcOne I100STS Industrial Series Stick and TIG Welding Machine Feature

• Newest Addition to inverter product line
• 115 volts, 100 amps
• TIG start - scratch
• Open Circuit Voltage - 85
• Output Range Amps - 5-100

The Arc One I 100 STS is the newest addition to our inverter product line. Weighing in at 10 lbs, this rugged 115 volt machine truly puts out 100 amps so don't hesitate to use 1/8" rod.